5.8Ghz 200mW transmitter. This system is Good for up to 500m flying with the supplied antenna. An optional directional antenna can extend range to 1km+. This unit a Includes built-in microphone. The receiver unit has additional AV outputs for video recording while using FPV goggles. $66.43 CLICK HERE
Specifications:
Specifically designed for our range of board cameras. $4.99 CLICK HERE
Light weight and easy to install. Our HobbyKing FPV mount system is a great way to mount your FPV board camera.
Special included bearings make pan and tilt smooth and bind free.
Kit includes bearings, screws, ball/socket, threaded rod and pre-cut fiberglass board. Specifically designed for our 1/3 inch sony CCD video camera.
Light weight and easy to install. Our HobbyKing FPV mount system is a great way to mount your FPV board camera.
Special included bearings make pan and tilt smooth and bind free.
Kit includes bearings, screws, ball/socket, threaded rod and pre-cut fiberglass board. Specifically designed for our 1/3 inch sony CCD video camera.
Spec.
Dimensions: 42x40mm
Weight: 10g
Servo type required: 5~10g
   |
The HobbyKing FPV tilt camera mounting system is a simple and easy way to mount your camera. Suitable for 450~500 class helicopters and made from light weight fibre glass material. The mounting plate features adjustable screw locations for mounting your heli and for relocating the camera mount to attain correct CoG. Kit includes screws, ball sockets, connection rods, linkages and pre-cut fiberglass board.
Spec:
Height: 185mm (to mounting plate)Skid width: 190mmSkid length: 290mmCamera mount area width: 110mmCamera mount area height: 100mmDry Weight: 188g (not including servo)
Material: Fibre Glass
Required:
Required:
1 x 9g Servo
Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage.
If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
Included.
1 x SONY CCD 1/3inch Camera
1 x 900Mhz 8 channel Video Transmitter (800mW)
1 x SONY CCD 1/3inch Camera
1 x 900Mhz 8 channel Video Transmitter (800mW)
Camera spec.
CCD sensor type:1/3 color SONY CCD
Pixel;
NTSC: 510(H)*492(V)
PAL: 500(H)*582(V) (included)
Scanning system: Interlaced scanning
Synchronization: System:Inter
Horizontal resolution: 420TV line
Minimum Illumination 0.01LUX/F1.2
DSP+CCD: CXD3142R+405AK
S/N Ratio: 48dB
Gamma Modification: 0.45
White balance: Auto
Auto backlight compensation: Auto
Lens: 3.6MM
Audio: No
Input voltage: 9~12.6V
Electric current 80MA
Electronic Shutter: 1/50 (60) ~ 1/100,000s
Video output: 1.0VP-P composite video
Operation Temp.: -20~50
Size: 38*38mm
Flight time: Approx 60min/100mah 3S
Pixel;
NTSC: 510(H)*492(V)
PAL: 500(H)*582(V) (included)
Scanning system: Interlaced scanning
Synchronization: System:Inter
Horizontal resolution: 420TV line
Minimum Illumination 0.01LUX/F1.2
DSP+CCD: CXD3142R+405AK
S/N Ratio: 48dB
Gamma Modification: 0.45
White balance: Auto
Auto backlight compensation: Auto
Lens: 3.6MM
Audio: No
Input voltage: 9~12.6V
Electric current 80MA
Electronic Shutter: 1/50 (60) ~ 1/100,000s
Video output: 1.0VP-P composite video
Operation Temp.: -20~50
Size: 38*38mm
Flight time: Approx 60min/100mah 3S
FPV Tx Spec.
Channel: 8-Ch, AV synchronization
Channel: 8-Ch, AV synchronization
Power: 800mW
Input voltage: 12V
Weight: 18g
Input voltage: 12V
Weight: 18g
Size: 53x45x19mm
Frequency: 0.9G 0.910G,0.980G,1.010G,1.040G
Frequency: 0.9G 0.910G,0.980G,1.010G,1.040G
A plug and play 2.4Ghz 100mW FPV system. $294.95 CLICK HERE
Great for people with mHz radio systems who dont plan to fly 2km high!
Fatshark goggles are known for their easy set-up and great clarity as well as wide viewing angle. Combined with a reliable low power consumption, light weight 2.4Ghz Tx and you have a simple, reliable no fuss FPV system that will have you flying in no time.
Standard antenna will give you 400-500mtrs range.
Included.FatShark FPV Goggles w/ inbuilt Rx.
FatShark (Airwave) Small footprint Tx 100mW 2.4Ghz (25x45mm)
Charger
LiPo Battery
Cables
Spare Foam
2.4Ghz or 5.8Ghz, which is best for you?
If you fly with a Mhz radio such as 72, 36 or 35mhz then you should choose a 2.4Ghz FPV system as it will give you more range for the same power. Many hard-core FPV pilots fly with Mhz radios because of its superior range to 2.4Ghz radio control systems.
If you have a Spektrum, Futaba or other 2.4Ghz radio, then you need to fly with a 5.8Ghz system.
 |
$77.49 CLICK HERE
Turnigy FPV Goggles offer exceptional value for money. Featuring a 320 x 240 4:3 Display with AV in, 50in virtual image and a 900mah lithium battery.
A great entry-level goggle which can be modified for a ski-mask or used as is for casual not-so-serious FPV fun.
Specifications:
Resolution: 320 x 240
Ratio: 4:3
Battery: 900mah lithium
Virtual Image size: 50in
Format: PAL/NTSC
Includes:AV Cable
Head phones
External 900mah battery
AC Charger
No comments:
Post a Comment