RC Speed Controller

Built with imported N-Channel mosFETs and an ultra fast Atmel MCU & heartbeat make this a high performance ESC with excellent sync capabilities. This ESC has a 4A SBEC for solid reliable servo power.
Programmable via an R/C controller.It allows you to program all functions to fit your specific needs, which makes it efficient and user friendly.  $19.25 CLICK HERE

 

Features: Extremely low internal resistance
Super smooth and accurate throttle linearity
Over heat and over-load protection
Auto shut down when signal is lost or radio interference becomes severe for more than 2 seconds
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
New Advanced programming software

Programming features:

Brake setting (we recommend using brake for only folding props applications)

Battery type(LiPo or NiCd/NiMh)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox and helicopter applications)

Governor mode(for helicopter applications)
Motor rotation( clockwise\counterclockwise)
Switching frequency
Low voltage cutoff type (power reduction orirnmediate shutdown)

 

Factory default settings:

Brake:  off
Battery type Detect:  LiPo with Automatic Cell
Low voltage cutoff threshold:  Medium (3.0V/65%)
Timing setup:  Automatic
Soft Acceleration Start Up:  Medium
Governor mode :  OFF
Frequency :  8kHz
Low voltage cutoff type:  Reduce power

 

Plush 40A Brushless Speed Controller
The Plush series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response compared to other BESCs in the same price range.
This BESC can handle 3A continuous current which is great for larger planes with bigger servos.

$21.99 CLICK HERE

Cont Current: 40A
Burst Current: 55A
BEC Mode: Linear
BEC : 5v / 3A
Lipo Cells: 2-6
NiMH : 5-18
Weight: 33g
Size: 55x28x13mm
User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.
The programming card is an excellent Item and simple to use!

The Turnigy K-Force series are based on an all new powerful microprocessor.

The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.  $63.83 CLICK HERE

 

Specification:

Output:  Continuous 100A, burst 150A up to 10 seconds.
Input Voltage:  2-6 cells lithium battery or 5-18 cells NIMH battery.  
BEC:  Switching mode DC-DC regulator.  3A@5.25V or 3A@6V switchable by user progromming.Control Signal Transmission: Optically coupled system.
Max Speed:    
   2 Pole: 210,000rpm
   6 Pole: 70,000rpm

 

Ultra fast microprocessor controlled, extremely low resistance circuit and chip design, and aluminum heatsink for better thermal dissipation are just some of the features in the new TURNIGY Super Brain range of brushless speed controllers.
The Super Brain brushless esc is a high performance ESC capable of standard and competition use.
Full protection, including signal loss, over-temperature.
Programable by USB, PC or your Tx.
Compatible with all radio systems.

 

$99.99 CLICK HERE
 

Features:

Supports the ‘Turnigy USB Linker’ to program the ESC by computer.
ESC Firmware upgradeable via the internet.
Integrated flight data logger, records data for the ENTIRE flight such as:
- Voltage
- Current
- Temperature
- Motor RPM
- Throttle travel

Programmable settings;
Startup (Default Standard/Soft/hard)
Low Voltage cutoff (Default 12.0/15.0/18.0/21.0/24.0/27.0/30.0/33.0/36.0V)
Current limiting (Default Standard/Very sensitive/Insensitivity/Disabled)

Brake (Default None/Soft/Hard)
PWM rate (8/12/16 KHz)

Timing (Default Auto/Low/Middle/High)

Cutoff type (Default Hard/Soft)

Governor mode (Default Auto/Low/High)

 

Spec.

Constant Current: 100A
Burst Current: 120A
Battery: 4-12S Lipoly
BEC: No (OPTO)

Motor Type: Brushless
Size: 69 x 52 x 24mm
Weight: 109g
Throttle range: 640us

**Programable with Turnigy programming Box and Turnigy USB Linker, see related items below.
We suggest customers to not program the esc with their Tx.

   12 Pole: 35,000rpm

  

Features:

*High performance microprocessor (24khz) brings out the best compatibility with all kinds of motors and the highest driving efficiency.
*Wide-open heatsink design to get the best heat dissipation effect.
*Improved Normal, Soft, Very-Soft start modes, compatible with aircraft and helicopter.
*Smooth, linear, quick and precise throttle response.
*Throttle signal transfered through optically coupled system to avoid the electromagnetic interference.
*Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
*Governor mode for helicopter. 
*The firmware of the ESC can be updated through the USB adapter.
*User programmable via Tx, Programming card or pc USB port. .

 

*Not compatible with non K-Force esc programming card.

Size:  70mm (L) * 34mm (W) * 16mm (H).Weight:  82g.