Showing posts with label HK-250GT. Show all posts
Showing posts with label HK-250GT. Show all posts

Sunday, October 16, 2011

Gift Certificate

$50.00 Gift Certificate
$50.00 Gift Certificate
$50.00 CLICK HERE

Are you tired of getting socks and underwear for your birthday, or are you a wife that knows what her husband really wants for Christmas?
The hobbyking.com gift certificate never expires, and can be redeemed for any product in our store.
Give a gift they are sure to use. Give a HobbyKing.com gift certificate.


Gift certificates are emailed to the account holder within 24hrs of Payment.
Gift certificates do not cover postage costs.Gift certificates can be given to anyone.
If more than 1 certificate is purchased it will be grouped into 1 single code. Receiver can request the code to be split into smaller amounts.
Gift certificates are not refundable, transferable and can not be replaced.
Gift certificates must be redeemed in full.


Club Event Support Pack ($100 Value Refund)

Club Event Support Pack ($100 Value Refund)


$100.00 CLICK HERE

RC Servo

HXT900 9g / 1.6kg / .12sec Micro Servo
HXT900 9g / 1.6kg / .12sec Micro Servo
$2.69 CLICK HERE

 HXT900, one of the most famous and the best value micro servos available.Used by tens of thousands of hobbyiests world wide. The HXT900 is the #1 trusted low cost 9g servo.
Size : 21x12x22 mm / 0.74x0.42x0.78 in
Voltage : 3v ~ 6v
Weight: 9g / 0.32oz
Speed : 0.12 sec/60(4.8V)
Torque : 1.6 kg-cm
Working Temp : -30C~60C
Teflon Bushing, 15cm wire, coreless motor
Servo arms & screw included

WARNING
These servos can be found on eBay and other asian sellers at close to this price, however be warned, they do not contain Taiwan/Japan components. HexTronik (the manufacturers of these servos) have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere!



HXT 6.9kg / 39.2g / .16sec Twin bearing servo

HXT 6.9kg / 39.2g / .16sec Twin bearing servo $5.95 CLICK HERE

The Hextronik 5010 servo wont break any records, it wont astound you with its amazing torque or scare your friends with its ninja-like high speed action, but it is a solid, reliable plastic gear servo thats economical and great for those that are not too serious about specification.

Dimentions: 40x20x38mm
Weight: 39g
Speed: .16sec/60Deg
Stall Torque: 6.5kg
Dead Bandwidth: 4us
Voltage: 4.8~6v
HXT 6.9kg / 39.2g / .16sec Twin bearing servo

Corona 939MG Digital Metal Gear Servo 2.7kg/ 12.5g/ 0.13sec
Corona 939MG Digital Metal Gear Servo 2.7kg/ 12.5g/ 0.13sec

$5.99 CLICK HERE 

Model: DS939MG 
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 240mA
Operating Speed: 0.14sec.60º/ 0.13sec.60º
Stall Torque: 2.5kg.cm / 2.7kg.cm
Size: 22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight: 12.5g
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR85
Gear: MetalConnector wire: 215mm
 
Digital metal gear servo 49g/10.5kg/.19sec 
 
Model: HD-9110MG
Voltage: 4.5v~6v
Speed: .19sec
Torque: 10.5kg/cm
Bearings: 2BB
Gears: Metal
Weight: 49g
Size: 40x20x38mm
 
Hitec HS-7955TG Titanium Gear Digital Servo 18kg/65g/0.19sec 

$92.74 CLICK HERE

Hitecs best servo just got better. Based on the powerhouse HS-5955TG servo the HS-7955TG has the added benefit of our G2 second generation programmable digital circuit. This new circuit has twice the resolution of our original circuit while adding programmable overload protection. The HS-7955TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 333oz./in. of torque at 6.0 volts, all this power is harnessed by incorporating the industries first Titanium gears for incredible wear resistance and two strong hardened steel gear pins and axial brass bushing in the servo case.
Specifications: Motor Type:  Coreless
Bearing Type:  Dual Ball Bearing
Speed @ 4.8v:  0.19 sec @ 60 deg.
Speed @ 6.0v:  0.15 sec @ 60 deg.
Torque @ 4.8v:   18kg.cm
Torque @ 6.0v:   24 kg.cm
Size:  40 x 20 x 37mm
Weight:  65.00g


Features:
G2 Digital Circuit
Coreless Motor
Dual Ball Bearing Supported Output Shaft
Metal Gear Train (MK first gear)
 
Programable Features Include:
    * Dead Band Width
    * Direction of Rotation
    * Speed of Rotation (slower)
    * End Points
    * Neutral Points
    * Fail Safe On/Off
    * Fail Safe Point
    * Resolution* (default is high resolution)
    * Overload Protection* (default is off)
 

RC Speed Controller

HobbyKing 40A BlueSeries Brushless Speed Controller

Built with imported N-Channel mosFETs and an ultra fast Atmel MCU & heartbeat make this a high performance ESC with excellent sync capabilities. This ESC has a 4A SBEC for solid reliable servo power.
Programmable via an R/C controller.It allows you to program all functions to fit your specific needs, which makes it efficient and user friendly.  $19.25 CLICK HERE
 
Features: Extremely low internal resistance
Super smooth and accurate throttle linearity
Over heat and over-load protection
Auto shut down when signal is lost or radio interference becomes severe for more than 2 seconds
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
New Advanced programming software

Programming features:
Brake setting (we recommend using brake for only folding props applications)
Battery type(LiPo or NiCd/NiMh)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox and helicopter applications)
Governor mode(for helicopter applications)
Motor rotation( clockwise\counterclockwise)
Switching frequency
Low voltage cutoff type (power reduction orirnmediate shutdown)
 
Factory default settings:
Brake:  off
Battery type Detect:  LiPo with Automatic Cell
Low voltage cutoff threshold:  Medium (3.0V/65%)
Timing setup:  Automatic
Soft Acceleration Start Up:  Medium
Governor mode :  OFF
Frequency :  8kHz
Low voltage cutoff type:  Reduce power
 
TURNIGY Plush 40amp Speed Controller

Plush 40A Brushless Speed Controller
The Plush series ESC are a very good quality controller. They have a broad range of programming features and a smooth throttle response compared to other BESCs in the same price range.
This BESC can handle 3A continuous current which is great for larger planes with bigger servos.

$21.99 CLICK HERE

Cont Current: 40A
Burst Current: 55A
BEC Mode: Linear
BEC : 5v / 3A
Lipo Cells: 2-6
NiMH : 5-18
Weight: 33g
Size: 55x28x13mm
User Programmable, both via controller and optional programming card. The programming card is an excellent item as it instantly tells the user the current settings and with a few simple clicks of the buttons, the user can change the settings and have graphical reassurance of those changes.
The programming card is an excellent Item and simple to use!

TURNIGY K-Force 100A Brushless ESC

The Turnigy K-Force series are based on an all new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.  $63.83 CLICK HERE
 
Specification:
Output:  Continuous 100A, burst 150A up to 10 seconds.
Input Voltage:  2-6 cells lithium battery or 5-18 cells NIMH battery.  
BEC:  Switching mode DC-DC regulator.  3A@5.25V or 3A@6V switchable by user progromming.Control Signal Transmission: Optically coupled system.
Max Speed:    
   2 Pole: 210,000rpm
   6 Pole: 70,000rpm
 
Turnigy Super Brain 100A Brushless ESC

Ultra fast microprocessor controlled, extremely low resistance circuit and chip design, and aluminum heatsink for better thermal dissipation are just some of the features in the new TURNIGY Super Brain range of brushless speed controllers.
The Super Brain brushless esc is a high performance ESC capable of standard and competition use.
Full protection, including signal loss, over-temperature.
Programable by USB, PC or your Tx.
Compatible with all radio systems.
 
Features:
Supports the ‘Turnigy USB Linker’ to program the ESC by computer.
ESC Firmware upgradeable via the internet.
Integrated flight data logger, records data for the ENTIRE flight such as:
- Voltage
- Current
- Temperature
- Motor RPM
- Throttle travel


Programmable settings;

Startup (Default Standard/Soft/hard)
Low Voltage cutoff (Default 12.0/15.0/18.0/21.0/24.0/27.0/30.0/33.0/36.0V)
Current limiting (Default Standard/Very sensitive/Insensitivity/Disabled)
Brake (Default None/Soft/Hard)
PWM rate (8/12/16 KHz)
Timing (Default Auto/Low/Middle/High)
Cutoff type (Default Hard/Soft)
Governor mode (Default Auto/Low/High)
 
Spec.
Constant Current: 100A
Burst Current: 120A
Battery: 4-12S Lipoly
BEC: No (OPTO)
Motor Type: Brushless
Size: 69 x 52 x 24mm
Weight: 109g
Throttle range: 640us

**Programable with Turnigy programming Box and Turnigy USB Linker, see related items below.
We suggest customers to not program the esc with their Tx.

   12 Pole: 35,000rpm
  
Features:
*High performance microprocessor (24khz) brings out the best compatibility with all kinds of motors and the highest driving efficiency.
*Wide-open heatsink design to get the best heat dissipation effect.
*Improved Normal, Soft, Very-Soft start modes, compatible with aircraft and helicopter.
*Smooth, linear, quick and precise throttle response.
*Throttle signal transfered through optically coupled system to avoid the electromagnetic interference.
*Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection
*Governor mode for helicopter. 
*The firmware of the ESC can be updated through the USB adapter.
*User programmable via Tx, Programming card or pc USB port. .
 
*Not compatible with non K-Force esc programming card.

Size:  70mm (L) * 34mm (W) * 16mm (H).Weight:  82g.

RC helicopter






HK-250GT Electric Helicopter Kit (Alloy/CF w/ Blades) 
 for $32.95CLICK HERE

The HK-250GT is a high performance factory-upgraded heli kit. With its true carbon fiber frame, hard alloy head and tail plus numerous upgrade components, the HK-250GT is sure to be a favourite amoungst micro 3D pilots.
 
 
Features.
Newly designed main rotor head set produced from billet alloy.
Newly designed metal control lever and CCPM metal swashplate for improved 3D performance.
New anti-rotation guide, with its strengthened frame base enhances the structural strength of the main frame.
Single unit tail belt with the new counter weighted tail blade grips make it easier to assemble and improving rudder efficiency.
 
Specification:
Length: 430mm
Height: 187mm
Main blade length: 205mm
Main rotor diameter: 450mm
Tail rotor diameter: 108mm
Motor pinion gear: 15T
Main drive gear: 120T
Tail drive gear: 28T
Drive gear ratio: 1:8:4.28
Weight(without power system): 138g
Flying weight: Approx 330g
 
HK-450GT Pro 3D Belt-Drive Helicopter Kit (Align T-Rex Compat.)
 $55.91 CLICK HERE

HK-450 CCPM 3D Electric Helicopter Kit (Align T-rex Compatible) Modeled on the famous and proven Align T-Rex 450Pro.
Take a close look at the head and tail of this awesome machine. Its ultra light, yet rigid design is strong enough for even the most skitzophrenic of 3D helicopter pilots!

This is a FULL 450Pro. All components are newly designed. Unlike other vendors, this helicopter DOES NOT share parts with previous versions. It is completely new.
When comparing helicopters, carefully look at the tail and head unit. Our 450Pro is FULLY Pro and does not use parts from the V2 or standard parts bin.
 
Features:
Newly designed head block with high rigidity and stability.
Single piece integrated design of main bearing block and servo mount.
Single piece integrated design of anti-rotation guide and gyro mount.
Single piece integrated landing gear.
Highly stable flybar control system.
High precision bearing mixing arms.
Newly designed high resolution swashplate.
Single piece battery mount with integrated canopy mount designed to bring CG closer to disk plane.
Highly rigid frame with single piece carbon side and bottom plates.
Highly efficient Belt driven tail design.
Weighted tail rotor blade grips to repel centripetal forces.
Straight-up in-frame rudder servo mount for improved geometry.
Newly designed aerodynamic canopy.
Newly designed high strength main blade grips.
 
HK-T250 CCPM Electric Helicopter Kit

Modeled on the famous and proven T-Rex 250. $29.99 CLICK HERE
This is the base model HK-T250 and is an exact clone of the T-Rex 250.
In standard trim this kit is not 3D capable due largely to the Nylon blades included with the kit.
The HK-T250 is an excellent way to hone your skills on a smaller more nimble machine.*

Spec.
Length: 430mm
Height: 187mm
Main Blade Length: 200/205mm
Main Rotor Diameter: 450/460mm
Tail Rotor Diameter: 108mm
Motor Pinion Gear: 15T/2.2mm
Main Drive Gear: 120T
Tail Drive Gear: 28T
Drive Gear Ratio: 1:8:4.25
Weight(w/o power system ): 138g
 
Required items.
Brushless Outrunner Motor
Servos
Gyro
Receiver
ESC
Lipoly Battery (800mAh 3S)
 
 
*Freakazoid indoor 3D champions can get their Snap-rolling freak on with our soon to be released HK-250GT.