Flymentor 3D helicopter stabilisation System $69.99 CLICK HERE
Flymentor 3D is a stabilization unit that helps the helicopter to self-stabilize in hover and also self recovery during 3D manuever.
This unit comes with 5 items; the main unit, gyro, CCD sensor, CD software and usb data cable (manual is in PDF format in the CD).
This unit comes with 5 items; the main unit, gyro, CCD sensor, CD software and usb data cable (manual is in PDF format in the CD).
Features: Control all movement, including attitude stabilization, speed control, position locking.
CCO sensor to capture picture of ground, comparing pictures to avoid drifting.
Switch working mode (horizontal mode and position mode) through AUX channel.
Integrating head locking gyro and swash plate mixer.
Control sensitivity and mode of internal gyro through GEAR channel.
Support swash plate 3S 120°, 3S 140°, 4S 90°, 4S 90°+45°
Keep balance in inverted flight.
Configured by computer through USB.
If you are using FM/PPM remote control device, when helicopter is out of control, the Flymentor 30 will set aileron, elevator, rudder to neutral, and keep pitch in the final signal position, and switch to positioning mode automatically, the sensitivity is 70%.
CCO sensor to capture picture of ground, comparing pictures to avoid drifting.
Switch working mode (horizontal mode and position mode) through AUX channel.
Integrating head locking gyro and swash plate mixer.
Control sensitivity and mode of internal gyro through GEAR channel.
Support swash plate 3S 120°, 3S 140°, 4S 90°, 4S 90°+45°
Keep balance in inverted flight.
Configured by computer through USB.
If you are using FM/PPM remote control device, when helicopter is out of control, the Flymentor 30 will set aileron, elevator, rudder to neutral, and keep pitch in the final signal position, and switch to positioning mode automatically, the sensitivity is 70%.
Specification:
Voltage: 4.8-6.0V
Current: 55mA (under 5V)
Weight:37G
Temperature: OC~ +40C
Under the stabilisation mode and positioning mode, maximum rotate speed allowed: J Aileron and Elevator: ,;2000 / s
Futaba GY520 The smallest, lightest and most advanced gyro in the world. GY Series technology revolutionized gyro performance in 2000 -- and the GY520 is doing it again today. Its cutting-edge MEMS (Micro ElectroMechanical System) sensor design, ultra high-speed processing speed and advanced PID control algorithm put it a quantum leap ahead of all other heading hold gyros in size, weight and performance. Its the gyro of tomorrow -- and its available today from Futaba. $129.99 CLICK HERE
Features:
Offers premium performance at a surprisingly affordable price
Weighs just 6.9 g - a full 9 g less than any other heli heading hold gyro!
Exceptionally compact, for fast, easy installation in helis ranging from electric micros to .91 glow 3D Monsters!
Cutting-edge MEMS (Micro ElectroMechanical System) sensors detect smaller angle deviations than any other technology
Improved, ultra high-speed processing rates and an 800° /second rate range offer faster, smoother response and consistent pirouette rates
Delivers superior performance with analog servos -- and excels with digitals!
Weighs just 6.9 g - a full 9 g less than any other heli heading hold gyro!
Exceptionally compact, for fast, easy installation in helis ranging from electric micros to .91 glow 3D Monsters!
Cutting-edge MEMS (Micro ElectroMechanical System) sensors detect smaller angle deviations than any other technology
Improved, ultra high-speed processing rates and an 800° /second rate range offer faster, smoother response and consistent pirouette rates
Delivers superior performance with analog servos -- and excels with digitals!
Specifications:
Width: 0.79in(20mm)
Length: 0.79in(20mm)
Height: 0.39in(10mm)
Weight: 0.243oz(6.9g)
Max. operating voltage: 3.8~6.0V(gyro only)
Current drain: 40mA(gyro only)
Selectable servo frame rate: 70Hz, 280Hz, and 560Hz
Center pulse width: 1520us(70Hz & 280Hz frame rate)
760us(560Hz frame rate)
Flight mode: User selectable F3C or 3D
Operating temperature: 14~113F
Control system: Advanced PID control
Sensor: MEMS vibrating structure gyro
Angular velocity range: +- 800 degrees per second
Recommended Servos: 
Main Technical Characteristics
Specifications 
$69.99 CLICK HERE
The Turnigy® Mini MEMS AVCS Gyro will give very precise R/C helicopter control.
It provides amazingly consistent yaw rates that avoid outside variables like the helicopters rotor head speed, rotor disc loading, flight speed and wind with the aid of a premium quality sensor and a powerful controller. This significant feature is a necessity for doing complex pirouetting and 3D manoeuvres.
The MINI MEMS AVCS provides extreme precision in a tiny package, suitable for any size helicopter. Its very easy to set up (with included programming box) and includes plenty of advanced features, making it suitable for beginners looking for rock solid tail movement and trustworthy flight characteristics, to those pilots needing the highly precise control of a MEMS gyro for complex 3D flight.
Specification: Sensor Type: MEMS
Digital signal processor
Operating voltage: 4-10 Volts, current < 60mA
Temperature range: -10°C to +50°C
Size: 20.5×19.5×10mm
Weight: 10g
Servo compatibility: 1520uS/333Hz, 1520uS/250Hz, 1520uS/167Hz and 760uS/333Hz digital servos, 1520uS/71Hz Analog servo.
Included;Turnigy® Mini MEMS GYRO
LCD programming Box
Double-sided adhesive foam & Stainless steel plate.
250~450 size electric: Futaba S9257 EP Heli Digital (280Hz/1520us)
.31~.91 size helicopter: Futaba S9254 Digital Heli servo (280Hz/1520us)
$59.99 CLICK HERE
GA510 is a high-performance tail-lock gyro specially optimized and designed for RC 3D helicopters. Equipped with a big size LCD display, and outstanding characteristics, such as super friendly LCD Interface, practical useful default/programable functions, wide servo range plus excellent tail-lock ability.
GA510 is a high-performance tail-lock gyro specially optimized and designed for RC 3D helicopters. Equipped with a big size LCD display, and outstanding characteristics, such as super friendly LCD Interface, practical useful default/programable functions, wide servo range plus excellent tail-lock ability.
Main Technical Characteristics
Sensor: quartz sensor
System control: AVCS (Angular Vector Control System)
Dual working condition: Tail-lock mode and Normal mode
Big size LCD display: the working status displayed on the LCD, which enables the setting all visually and easily.
Support multiple tail servos: 1520us-pulse-width digital servos and new 760us narrow pulse-width servos.
System control: AVCS (Angular Vector Control System)
Dual working condition: Tail-lock mode and Normal mode
Big size LCD display: the working status displayed on the LCD, which enables the setting all visually and easily.
Support multiple tail servos: 1520us-pulse-width digital servos and new 760us narrow pulse-width servos.
Specifications
Working voltage: DC 3.3 ~9V
Working current: 40 mA
Working temperature: -5~60C
External dimensions: 38 × 30 × 17 mm
Weight: 20g
Working current: 40 mA
Working temperature: -5~60C
External dimensions: 38 × 30 × 17 mm
Weight: 20g
Turnigy Piezo Head Lock & Standard Gyro. $24.79 CLICK HERE
The TR302-AD is compatible with both Digital and Analog systems.
The TR302-AD is compatible with both Digital and Analog systems.
Features;
Ultra small & light
Drift Cancel Circuit
Temperature Compensation Circuit
Head lock and standard mode.
High quality & very precise
Ultra small & light
Drift Cancel Circuit
Temperature Compensation Circuit
Head lock and standard mode.
High quality & very precise
Specifications :
Small Size piezoelectric ceramic gyro
Voltage used : 4.2 - 7V
Power consumption : Approx 33mA
Operation temp : -5C - 60C
Built-in Drift cancel - circuit
Temperature compensation circuit
 |
The Turnigy® Mini MEMS AVCS Gyro will give very precise R/C helicopter control.
It provides amazingly consistent yaw rates that avoid outside variables like the helicopters rotor head speed, rotor disc loading, flight speed and wind with the aid of a premium quality sensor and a powerful controller. This significant feature is a necessity for doing complex pirouetting and 3D manoeuvres.
The MINI MEMS AVCS provides extreme precision in a tiny package, suitable for any size helicopter. Its very easy to set up (with included programming box) and includes plenty of advanced features, making it suitable for beginners looking for rock solid tail movement and trustworthy flight characteristics, to those pilots needing the highly precise control of a MEMS gyro for complex 3D flight.
Specification: Sensor Type: MEMS
Digital signal processor
Operating voltage: 4-10 Volts, current < 60mA
Temperature range: -10°C to +50°C
Size: 20.5×19.5×10mm
Weight: 10g
Servo compatibility: 1520uS/333Hz, 1520uS/250Hz, 1520uS/167Hz and 760uS/333Hz digital servos, 1520uS/71Hz Analog servo.
Included;Turnigy® Mini MEMS GYRO
LCD programming Box
Double-sided adhesive foam & Stainless steel plate.
No comments:
Post a Comment