Red Arrows Hawk 35mm EDF Micro Jet EPO (PNF)
$63.70 CLICK HERE
This tiny BAE Hawk is amazing, EPO foam combined with its featherweight stats means it will be very forgiving of the odd less than 100% landing. The 35mm Fan Unit & ESC are pre-installed as are the aileron and elevator servos, the model comes in 2 pieces so all you have to do when it arrives is attach the vertical stabilizer, hook up the RC equipment to a Reciever that uses Micro Molex 3 Pin conectors, such as the HobbyKing OrangeRX 4 Channel Micro reciever and you are ready to go...... where were we? Ah yes, performing those famous Red Arrows aerobatics in the local park, basketball court, in fact pretty well anywhere, these models are an absolute hoot when flown with friends, in fact get enough of you together and see if you can pull off some of those breathtaking close formation routines the Red Arrows are famous for!
The box the model arrives in is really handy for not only transporting the model to prevent hanger rash but the spare pockets in the packing foam are ideal for carrying spare Lipolys and you will have so much fun with this, I would carry a few! This Hawk is so cute, even your Wife will like it!
Specs:Wing Span: 363mmLength: 431mmFlying Weight: 95gWing Area: 2.35dm2Wing Loading: 40.4g/dm2EDF: 35mm with 9000kv Brushless Outrunner MotorESC: 6A w/BECServo: 3 x 2g
Includes:Optional Missiles
3 Blade Fan Rotor
Instruction Book
Requires:OrangeRx 4 Ch Micro RX (Or compatible RX with 1.25mm Molex 3 Pin Connectors)
7.4v 450mAh 2s Lipoly Battery
Messerschmitt BF109E w/Stand 650mm (PNF)
$62.40 CLICK HERE
This superbly finished and very scale BF109E is a perfect partner for our mini FW190D, supplied with a display stand, the paint and decals make for a striking looking model that is nicely finished with a three blade prop, proper "109" spinner and lots of plastic molded parts that give this little parkflyer a scale finish good enough to put it on display in any part of the home without the wife complaining......too much.
Flight performance is excellent, all control surfaces are hinged and the pre-fitted servos are more than up to the job. The pre-fitted brushless motor gives heaps of power for a genuine fighter like performance and build time is minimal thanks to its Plug N Fly configuration, also included is a screwdriver to help with construction and a spare prop and clevises just in case. Cheap and fast to put into the air yet a real looker and performer, all this model needs is a FW190D to patrol your park with and a Spitfire from the range to dogfight with!
Specs:Wingspan: 650mmLength: 580mmFlying Weight: 360gMotor: 2225-1900kv Brushless OutrunnerESC: 10A w/BECServo: 5g x 23 Channel
Includes:Screwdriver
Spare 3 blade Prop & Spare Clevise
Instructions
Requires:Your Own 4 Channel TX/RX
600mAh~800mAh 2s Lipoly Battery
MX2 Blue 3D 1400mm EPO (PNF)
$143.65 CLICK HERE
The distinctive and scale scheme is ideal for orientation. The MX2 is large for an EPO model and it looks nearly twice the size once its in the air. Its a blast to fly and is very 3D capable!
The powerful, pre-installed 36-48 motor spinning that large & scale 3 blade prop gives plenty of thrust for the wildest of maneouvers, and the pre-installed servos are certainly up to the job. Generous size control surfaces combined with light weight ensure this is a true performer as well as a head turner. Practical as well as easy on the eye, the wings are detachable for easy transportation, a large canopy ensures easy access to Lipoly tray, wing bolts and so on.
Specs:Wingspan: 1400mmLength: 1290mmFlying Weight: 1900gWing Loading: 50g/dm2Motor: 42-48 Brushless OutrunnerESC: 70A w/BECServo: 2 x 9g, 2 x 17g4 Channel
Includes:All Hardware
Instruction Booklet
Requires:Your Own 4~6 Channel TX/RX
2200mAh 4s Lipoly Battery
Durafly Cessna 310 1100mm (PNF)
$109.99 CLICK HERE
Despite having its design origins in the 1950s, the Cessna 310 is a thoroughly modern looking 6 seat aircraft and this superb Durafly model is a great scale representation.
Made from ultra tough EPO foam, this Plug and Fly Cessna 310 is a fast and easy model to assemble, the pre-fitted motors and ESCs are already wired in parallel and all servos are pre-installed and centered. The 1pc wing is removable for easy transport and also features nav lights, as does the tail. The Nav lights are also pre-installed and pre-wired so all you need to do is plug them in! The plug-in scale under-carriage is held in by a clever but secure bracket and when testing this model we found it to be very robust and able to handle the roughest of landing strips. There is lots of scale detail on offer including the three blade props with matching spinners, detailed pilot & cockpit, ladder, exhaust stubs and so on.
As you can see from our flight test video footage, the Durafly Cessna 310 is a fantastic performer with plenty of power on tap, very smooth and predictable in flight and a synch to land. The battery hatch is perfect size for a 2200mAh 3s Lipoly, which gives excellent flight duration, and its not likely you wont have one or two of those in your flightbox! Good looking, easy to assemble & fly and very robust, this is a brilliant scale model that would make an excellent choice for new pilots that have mastered a high wing trainer, but at the same time offers the more advanced pilot a quality, robust and superb flying sport-scale model that is brilliantly practical and guaranteed to give hours of fun!
Specs:Wingspan: 1100mmLength: 950mmFlying Weight: 1100gWing Area: 27.0dm2Wing Loading: 56.3g/dm2ESC: 20A w/BEC x 2Motor: Bell Type Brushless Outrunner 1300kv x2Servo: 9g x 4
Includes:Decals
All Hardware
Glue
Tools
Color Instruction Book
Requires:Your Own 4ch TX/RX
2200mAh 3s Lipoly Battery
EPO Cessna 182 With LED Lighting (RTF)
.jpg)
$119.99 CLICK HERE
       |
$63.70 CLICK HERE
This tiny BAE Hawk is amazing, EPO foam combined with its featherweight stats means it will be very forgiving of the odd less than 100% landing. The 35mm Fan Unit & ESC are pre-installed as are the aileron and elevator servos, the model comes in 2 pieces so all you have to do when it arrives is attach the vertical stabilizer, hook up the RC equipment to a Reciever that uses Micro Molex 3 Pin conectors, such as the HobbyKing OrangeRX 4 Channel Micro reciever and you are ready to go...... where were we? Ah yes, performing those famous Red Arrows aerobatics in the local park, basketball court, in fact pretty well anywhere, these models are an absolute hoot when flown with friends, in fact get enough of you together and see if you can pull off some of those breathtaking close formation routines the Red Arrows are famous for!
The box the model arrives in is really handy for not only transporting the model to prevent hanger rash but the spare pockets in the packing foam are ideal for carrying spare Lipolys and you will have so much fun with this, I would carry a few! This Hawk is so cute, even your Wife will like it!
Specs:Wing Span: 363mmLength: 431mmFlying Weight: 95gWing Area: 2.35dm2Wing Loading: 40.4g/dm2EDF: 35mm with 9000kv Brushless Outrunner MotorESC: 6A w/BECServo: 3 x 2g
Includes:Optional Missiles
3 Blade Fan Rotor
Instruction Book
Requires:OrangeRx 4 Ch Micro RX (Or compatible RX with 1.25mm Molex 3 Pin Connectors)
7.4v 450mAh 2s Lipoly Battery
Messerschmitt BF109E w/Stand 650mm (PNF)
     |
$62.40 CLICK HERE
This superbly finished and very scale BF109E is a perfect partner for our mini FW190D, supplied with a display stand, the paint and decals make for a striking looking model that is nicely finished with a three blade prop, proper "109" spinner and lots of plastic molded parts that give this little parkflyer a scale finish good enough to put it on display in any part of the home without the wife complaining......too much.
Flight performance is excellent, all control surfaces are hinged and the pre-fitted servos are more than up to the job. The pre-fitted brushless motor gives heaps of power for a genuine fighter like performance and build time is minimal thanks to its Plug N Fly configuration, also included is a screwdriver to help with construction and a spare prop and clevises just in case. Cheap and fast to put into the air yet a real looker and performer, all this model needs is a FW190D to patrol your park with and a Spitfire from the range to dogfight with!
Specs:Wingspan: 650mmLength: 580mmFlying Weight: 360gMotor: 2225-1900kv Brushless OutrunnerESC: 10A w/BECServo: 5g x 23 Channel
Includes:Screwdriver
Spare 3 blade Prop & Spare Clevise
Instructions
Requires:Your Own 4 Channel TX/RX
600mAh~800mAh 2s Lipoly Battery
MX2 Blue 3D 1400mm EPO (PNF)
      |
$143.65 CLICK HERE
This model is hot!
An EPO 1.4m 3D head-turning machine; this large scale model will surely draw a crowd at any club and demand full respect amongst 3D pilots the world over.
An EPO 1.4m 3D head-turning machine; this large scale model will surely draw a crowd at any club and demand full respect amongst 3D pilots the world over.
The distinctive and scale scheme is ideal for orientation. The MX2 is large for an EPO model and it looks nearly twice the size once its in the air. Its a blast to fly and is very 3D capable!
The powerful, pre-installed 36-48 motor spinning that large & scale 3 blade prop gives plenty of thrust for the wildest of maneouvers, and the pre-installed servos are certainly up to the job. Generous size control surfaces combined with light weight ensure this is a true performer as well as a head turner. Practical as well as easy on the eye, the wings are detachable for easy transportation, a large canopy ensures easy access to Lipoly tray, wing bolts and so on.
Specs:Wingspan: 1400mmLength: 1290mmFlying Weight: 1900gWing Loading: 50g/dm2Motor: 42-48 Brushless OutrunnerESC: 70A w/BECServo: 2 x 9g, 2 x 17g4 Channel
Includes:All Hardware
Instruction Booklet
Requires:Your Own 4~6 Channel TX/RX
2200mAh 4s Lipoly Battery
Durafly Cessna 310 1100mm (PNF)
      |
$109.99 CLICK HERE
Despite having its design origins in the 1950s, the Cessna 310 is a thoroughly modern looking 6 seat aircraft and this superb Durafly model is a great scale representation.
Made from ultra tough EPO foam, this Plug and Fly Cessna 310 is a fast and easy model to assemble, the pre-fitted motors and ESCs are already wired in parallel and all servos are pre-installed and centered. The 1pc wing is removable for easy transport and also features nav lights, as does the tail. The Nav lights are also pre-installed and pre-wired so all you need to do is plug them in! The plug-in scale under-carriage is held in by a clever but secure bracket and when testing this model we found it to be very robust and able to handle the roughest of landing strips. There is lots of scale detail on offer including the three blade props with matching spinners, detailed pilot & cockpit, ladder, exhaust stubs and so on.
As you can see from our flight test video footage, the Durafly Cessna 310 is a fantastic performer with plenty of power on tap, very smooth and predictable in flight and a synch to land. The battery hatch is perfect size for a 2200mAh 3s Lipoly, which gives excellent flight duration, and its not likely you wont have one or two of those in your flightbox! Good looking, easy to assemble & fly and very robust, this is a brilliant scale model that would make an excellent choice for new pilots that have mastered a high wing trainer, but at the same time offers the more advanced pilot a quality, robust and superb flying sport-scale model that is brilliantly practical and guaranteed to give hours of fun!
Specs:Wingspan: 1100mmLength: 950mmFlying Weight: 1100gWing Area: 27.0dm2Wing Loading: 56.3g/dm2ESC: 20A w/BEC x 2Motor: Bell Type Brushless Outrunner 1300kv x2Servo: 9g x 4
Includes:Decals
All Hardware
Glue
Tools
Color Instruction Book
Requires:Your Own 4ch TX/RX
2200mAh 3s Lipoly Battery
EPO Cessna 182 With LED Lighting (RTF)
.jpg) .jpg) .jpg) .jpg) .jpg)  |
$119.99 CLICK HERE
The delux Mini Cessna 182 RTF is packed with features and includes everything you need to be flying in next to no time. A combination of flaps and large slow fly prop makes this little Cessna the perfect beginners choice as it will have excellent slow fly/slow landing characteristics. Other features that make this neat scale model ideal for new pilots include a linked steerable noseleg, which is sprung to help with less than perfect landings and being made from EPO foam, it is tough and can be repaired easily and quickly.
The Model requires no glue to finish, simply bolt on the tail and main wing, connect the flaps, ailerons and wing nav lights and you are ready to go! The Transmitter is already bound to the pre-fitted reciever, so simply charge the included Lipoly with the included charger and go fly!
The included 6 channel Transmitter features dual rates, a trainer input, a toggle switch to activate the Nav lights in flight, a retract switch, a mix option, 2 position flap toggle and servo reverse, meaning this radio will be perfect for the new pilot as an entry level 2.4ghz set.
The optional float set will add a new dimension to your flying, this is truly a model that will give you hours of fun.
Spec.
Material: EPO
WingSpan: 928mmLength: 723mm Propeller: 8060
Wing load: 45.6g sp.dm Flying Weight: 584gMotor: CF2812 1400kv Brushless outrunner ESC: 20A w/BECBattery: 11.1v 1300mAh 3S1P Lipoly
Servos: 9g x 4
Features:
Flaps
Nav Lights
Sprung Front Oleo Leg
6 Channel (elevator, rudder, aileron, throttle, flaps, lights)
Includes:
6 Channel 2.4ghz TX/RX
Lipo Charger & Power Supply
1300mAh 3s Lipoly
Tools
Required.8 x AA dry Cell Batteries for the Transmitter
Required.8 x AA dry Cell Batteries for the Transmitter
*Note: Floats sold separately.
.jpg)
